Order Now
Featured Item
Literature Library
Application Examples
Technical Tips
Repair Department
Site Map
Contact Us
Employment Opportunities

Clean Tower Separator Systems

Engineered for Performance - Grit, scale and troublesome solids are no longer a problem with the Wingert Clean Tower Separator System. Whether the application requires the removal of solids from a cooling tower basin or a recirculating loop, the Wingert Clean Tower Separator System is ready to go to work on even the toughest of applications. With ten standard models to choose from and flow rates from 38-1200 GPM, these compact filtration systems come fully assembled, factory tested and ready for installation. All systems are designed with a 90 TDH pump, pre-strainer, separator, recovery tank and a NEMA 4 control panel.
Download PDF Literature: Brochure / Specification Sheets / Instruction Manual
  • Carbon steel separator has no moving parts or internal slots
         to clog
  • End suction pump designed with 90 TDH, TEFC motor and
         cast iron housing
  • Carbon steel pre-strainer with internal 1/8" perforated stainless
         steel basket
  • Carbon steel liquid recovery tank (internally epoxy coated)
         with stainless steel basket and 25 micron PE filter bag
  • Service indicator package that detects loss of flow on the clean
         side of the recovery tank (no parts exposed to solids)
  • NEMA 4 control panel with IEC starter and overload, main
         power switch, pump H-O-A selector switch, 120 volt control
         power, ready-to-use external auto and service hook-ups,
         CSA approved
  • Coated with water based enamel paint
  • All carbon steel and brass piping
  • Brass/bronze isolation valves
         (2" and below are ball type / 3" and up are butterfly type)
  • Carbon steel skid, 1/4" thick deck plate, 4" channel side rails,
         lifting lugs and forklift slots
  • 150 PSI maximum working pressure
  • 150° F maximum working temperature

  • J.L. Wingert Representatives can assist you with the selection of equipment best suited to your specific needs. Contact our customer service department by e-mail at or call us Monday through Friday from 7:00 a.m. to 5:00 p.m. PST at (714) 379-5519, or fax us at (714) 379-5549.

    Copyright © 2003 J.L. Wingert Company - Last modified: 3/24/08