This switch package offers a complete solution for high level spill prevention or low level pump protection installed through the side wall of the tank. The relay, FET or reed output provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. Each assembly includes a compact junction box and level switch. To complete your product, select the appropriate sensor technology and material for your application. For hazardous locations, select the ultrasonic sensor with the intrinsically safe output.

Features:

Rugged level switch and compact relay controller package

Offered in 4 sensing technologies for complete application coverage

Available in intrinsically safe or general purpose configurations

Relay, FET or reed switch output for interface w/ remote ctrl. devices

All plastic construction with PP or PVDF wetted materials

PP junction box rated NEMA 4X with 1/2 inch conduit connector

Selectable normally open or closed switch states

This liquid or gas flow switch package offers a complete solution for low flow pump or process protection. The short sensor is intended for use in pipe or ducting from 1/2 inch to 1 1/2 inch; the long sensor is applied from 2 inch up. The compact relay controller provides direct actuation of valves, alarms or pumps rated up to a maximum of 1/2 horsepower. Each assembly includes a compact relay controller and flow switch. To complete your product, select the appropriate liquid or gas sensor configuration, sensor length and material for your application.

Features:

Rugged flow switch and compact relay controller package

Offered in liquid and gas configurations for broad application coverage

Fail-safe ctrlr. provides direct actuation of pumps, blowers and alarms

All plastic construction with PP/Ryton or PVDF wetted materials

PP enclosure rated NEMA 4X with 1/2 inch conduit connector

LED indicators for liquid, relay and power status

Adjustable 0-60 second time delay dampens out relay chatter

Invert switch provides simple NO or NC relay operation

This liquid or gas flow switch package offers a complete solution for low flow pump or process protection. The short sensor is intended for use in pipe or ducting from 1/2 inch to 1 1/2 inches; the long sensor is applied from 2 inches up. The FET output provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. Each assembly includes a compact junction box and flow switch. To complete your product, select the appropriate liquid or gas sensor configuration, sensor length, material and output for your application.

Features:

Rugged flow switch and compact junction box package

Offered in liquid and gas configurations for broad application coverage

All plastic construction with PP/Ryton or PVDF wetted materials

Sensor is not damaged by abnormally high flow velocities

Relay or FET switch output for interface with PLC, SCADA or alarms

PP junction box rated NEMA 4X with 1/2 inch conduit connector

Selectable normally open or closed switch states

This switch package offers a complete solution for high level spill prevention or low level pump protection installed through the side wall of the tank. The compact relay controller provides direct actuation of valves, alarms or pumps rated up to 1/2 horsepower. Each assembly includes a compact relay controller and level switch. To complete your product, select the appropriate sensor technology and material for your application.

Features:

Rugged level switch and compact relay controller package

Offered in 4 sensing technologies for complete application coverage

Fail-safe ctrlr. provides direct actuation of valves, pumps and alarms

All plastic construction with PP or PFA wetted materials

PP enclosure rated NEMA 4X with 1/2 inch conduit connector

LED indicators for liquid, relay and power status

Adjustable 0-60 second time delay dampens out relay chatter

Invert switch provides simple NO or NC relay operation