This switch package offers a complete solution for high level spill prevention or low level pump protection. The relay, FET or reed output provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. Each assembly includes a compact junction box, installation fitting and level switch. To complete your product, select the appropriate sensor technology and material for your application, and specify the switch point dimension. For hazardous locations, select the ultrasonic sensor with the intrinsically safe output.

Features:

Rugged level switch, fitting and compact junction box package

Offered in 4 sensing technologies for complete application coverage

Available in intrinsically safe or general purpose configurations

Fitting available in custom lengths from 6 inches to 8 feet

Entire level switch assembly installs through standard 2 inch fittings

Relay, FET or reed switch output for interface with remote control devices

All plastic construction with PP or PVDF wetted materials

PP junction box rated NEMA 4X with 1/2 inch conduit connector

Selectable normally open or closed switch states

This switch package offers a complete solution for high level spill prevention or low level pump protection. The compact relay controller provides direct actuation of pumps or valves while the Strobe-Alert indicates local alarm conditions. Each assembly includes a flash alarm, compact relay controller, installation fitting and level switch. To complete your product, select the appropriate sensor technology and material for your application, and specify the switch point dimension.

Features:

Rugged level switch, compact relay controller and alarm package

Offered in 4 sensing technologies for complete application coverage

Strobe brings immediate attention to process alarm conditions

Fitting available in custom lengths from 6 inches to 8 feet

Fail-safe controller provides direct actuation of pumps, valves and alarms

All plastic construction with PP or PVDF wetted materials

PP enclosure rated NEMA 4X with 1/2 inch conduit connector

LED indicators for liquid, relay and power status

Adjustable 0-60 second time delay dampens out relay chatter

Invert switch provides simple NO or NC relay states

This switch package offers a complete solution for high level spill prevention or low level pump protection. The compact relay controller provides direct actuation of valves, alarms or pumps rated up to 1/2 horsepower. Each assembly includes a compact relay controller, installation fitting and level switch. To complete your product, select the appropriate sensor technology and material for your application, and specify the switch point dimension.

Features:

Rugged level switch and compact relay controller package

Offered in 4 sensing technologies for complete application coverage

Fitting available in custom lengths from 6 inches to 8 feet

Fail-safe controller provides direct actuation of pumps, valves and alarms

All plastic construction with PP or PVDF wetted materials

PP enclosure rated NEMA 4X with 1/2 inch conduit connector

LED indicators for liquid, relay and power status

Adjustable 0-60 second time delay dampens out relay chatter

Invert switch provides simple NO or NC relay operation

This single point fitting enables users to install a single Flowline level switch to a specific point within the tank. Offered in PVC, PP or PVDF materials, Switch Pak systems are commonly used as high level safety alarms in chemical bulk storage tanks. Each Switch Pak fitting is built custom to your requirements. To complete your product, select the appropriate material and specify the fitting length or A dimension. For integral wiring termination, add a compact junction box. For open tanks or sumps, add a side mount bracket.

Features:

Rugged level switch, fitting and compact junction box package

Offered in 4 sensing technologies for complete application coverage

Available in intrinsically safe or general purpose configurations

Fitting available in custom lengths from 8 inches to 8 feet

Entire assembly installs through standard 2 inch fittings

Relay, FET or reed switch output for interface w/ remote ctrl. devices

All PP construction for corrosive environments

PP junction box rated NEMA 4X with 1/2 inch conduit connector

Selectable normally open or closed switch states

Download PDF Literature: Specification Sheet  / Product Manual