This AC powered controller is offered in both level and flow switch configurations. The LC40-1001 level switch controller is commonly used as a high or low level safety shut off with a single sensor. The LC80-1001 flow switch controller is commonly used as a low flow shut off for pump or process protection with a single sensor. The general purpose controller mounts on a 35mm DIN rail or panel type installation.

Download PDF Literature: Specification Sheet  / Product Manual

This AC powered controller is offered in both level and flow switch configurations. The LC42-1001 level switch controller is commonly used for the automatic filling or emptying of a tank between two sensors with a third high or low level alarm sensor. The LC82-1001 flow switch controller is commonly used as a low flow shut off for pump or process protection with two independent sensors. The general purpose controller mounts on a 35 mm DIN rail or panel type installation.

Download PDF Literature: Specification Sheet  / Product Manual

This AC powered level switch controller is commonly used for the automatic filling or emptying of a tank between two sensors. A single latched relay performs the automatic control with valves or pumps rated up to 1/2 horsepower. Combine the LC41-1001 controller with Smart Trak, two level sensors and a compact junction box to complete your remote lift station package. The general purpose controller mounts on a 35 mm DIN rail or panel type installation.

Download PDF Literature: Specification Sheet  / Product Manual

For hazardous applications, package the isolation relay controller with our intrinsically safe level switches. The LC90-1001 level switch controller is commonly used as a high or low level safety shut off with a single sensor. The controller has a built-in intrinsic safety barrier and is approved for use with Class I, Groups A, B, C and D; Class II, Groups E, F and G; and Class III applications. The isolation controller mounts on a 35 mm DIN rail or panel type installation.

Download PDF Literature: Specification Sheet  / Product Manual

For hazardous applications, package the isolation relay controller with our intrinsically safe level switches. The LC91-1001 controller is commonly used for the automatic filling or emptying of a tank between two sensors. The controller has a built-in intrinsic safety barrier and is approved for use with Class I, Groups A, B, C and D; Class II, Groups E, F and G; and Class III applications. The isolation controller mounts on a 35 mm DIN rail or panel type installation.

Download PDF Literature: Specification Sheet  / Product Manual

For hazardous applications, package the isolation relay controller with our intrinsically safe level switches. The LC92-1001 controller is commonly used for the automatic filling or emptying of a tank between two sensors with a third high or low level alarm sensor. The controller has a built-in intrinsic safety barrier and is approved for use with Class I, Groups A, B, C and D; Class II, Groups E, F and G; and Class III applications. The isolation controller mounts on a 35 mm DIN rail or panel type installation.

Download PDF Literature: Specification Sheet  / Product Manual