Order Now
Featured Item
Literature Library
Application Examples
Technical Tips
Repair Department
Site Map
Contact Us
Employment Opportunities


Please click here to download our most recent Profile Newsletter in PDF format. Past Profile Newsletters are also available for download by clicking here.

Volume 8  Issue 2

? Wingert Clean Tower
   Separator Systems

Wingert Clean Tower Separator Systems

Grit, scale and troublesome solids are no longer a problem with the Wingert Clean Tower Separator System. Whether the application requires the removal of solids from a cooling tower basin or a recirculating loop, the Wingert Clean Tower Separator System is ready to go to work on even the toughest of applications. With ten standard models to choose from and flow rates from 38-1200 GPM, these compact systems come fully assembled, factory tested and ready for installation. All systems are designed with a 90 TDH pump, pre-strainer, separator, recovery tank and a NEMA 4 control panel.

  • Carbon steel separator has no moving parts or internal slots to clog
  • 150° F maximum working temperature
  • 150 PSI maximum working pressure
  • Carbon steel skid with lifting lugs and forklift slots
  • Brass / bronze isolation valves
  • Carbon steel and brass piping
  • Coated with water based enamel paint
  • NEMA 4 control panel with IEC starter and overload, main power switch, pump H-O-A selector switch, 120 volt control power, ready-to-use external auto and service hook-ups, CSA approved system
  • Service indicator package (detects loss of flow on the clean side of the recovery tank with no parts exposed to solids)
  • Carbon steel liquid recovery tank (internally epoxy coated) with stainless steel basket and 25 micron PE filter bag
  • Carbon steel pre-strainer with internal perforated 316 stainless steel basket
  • End suction pump, designed with 90 TDH, TEFC motor, cast iron housing

  • Pumps & Seals
  • Spray Nozzles
  • Valves
  • Heat Exchangers
  • Impellers
  • Pressure Tanks
  • Probes
  • Water Meters
  • Small Orifices
  • Cooling Fluid
  • Cutting Fluid
  • Filtration Equipment

  • J.L. Wingert Representatives can assist you with the selection of equipment best suited to your specific needs. Contact our customer service department by e-mail at or call us Monday through Friday from 7:00 a.m. to 5:00 p.m. PST at (714) 379-5519, or fax us at (714) 379-5549.

    Copyright © 2003 J.L. Wingert Company - Last modified: 02/22/11